Home > News > Info Center

Air Handling Unit Series

How to Choose the Correct Clean Room Door?

Sep. 25, 2020

Choosing the right clean room door can be tricky, but hospital doors Manufacturers can help.Here are 10 things they think every customer should consider before choosing a clean room door

Cleanroom doors are an important part of a cleanroom because they are responsible for sealing the controlled environment.If they do not work properly, the clean room is at higher risk of contamination.

Here, clean room doors manufacturers provide nine key considerations when choosing a clean room door based on their years of experience in the clean room construction industry.

1. A perfectly flat surface

Choose a door that is completely flat on both sides.It is easy to clean and maintain good hygiene if there is no edge to dust entry.The best option is a door with a smooth insert into the window that is flush with the wall of the clean room.

2. Easy to integrate

Note the system dependency of the cleanroom door.Many manufacturers sell only doors integrated into their systems.This makes it difficult to change the parameters within the facility without affecting the integrity of the clean room door.However, system-independent doors can be installed in any clean room, independent of the manufacturer.

3. Thick door plank

Choose doors that resist bending and impact.A thickness of 60 mm is recommended to provide strength and reliability in most industrial environments.Aluminum is an especially durable material.

4. High air tightness

What level of appropriate air tightness should the door have?The 3.5 m3 / hm2 measured at 200 Pa pressure is a reliable and good value.Some doors can be fitted with double gasket technology and integrated flume gasket to further improve air tightness.

5. Resistant cleaning products

Every day, a variety of fortified substances are subjected to rigorous cleaning to ensure a high level of hygiene. As with any other clean room surface, a clean room door must be resistant to the regular use of any cleaning product, and any reaction between the door and the chemical needs to be avoided.To ensure that their branded doors are resistant to any cleaning products used in the industry.

Clean Room Door

Clean Room Door

6. Safety glass

In a clean room, safety is Paramount.Therefore, every part of the product should be designed to meet the highest safety requirements.It has shatterproof glass, safety glass, which means that if the window breaks, it stays where it is, and there's no risk of it falling apart.

7. Anti-static surface

The anti-static surface ensures that the door does not attract dust and microcontaminants.To keep the clean room as clean as possible, all surfaces, including the door of the clean room, shall be antistatic.

8. Advanced hardware

It's not just the surface of the door that needs special attention.Smaller components such as locks, door handles and hinges should also be of the best quality to ensure durability and ease of maintenance.

9. Locking options

If there is any risk of power being cut off, the mechanical lock will work as well as the electronic system.If access levels are hierarchical, then it may work best to consider using a card system - so that you can grant different permissions to employees.Just press the button, the automatic door will automatically close, very convenient.Electronic locking systems ensure maximum security through interlock control and locking.

 

 


Jenny-YZ-AL E-MAIL :jenny@yizhonglvye.com 522075683 Jenny-YZ-AL

Jenny-YZ-AL